| QTY(PCS) | G.W/N.W(KG) | MEAS(CM) |
| 0/1 | 10.5/11 | 39x30x12.5 |
"Application:fits front wheel drive cars and small trucksMaterial: Forged carbon steel, BMC for storage.
Operation:
Step.1 Determine if the vehicle has a trapped rotor or a floating rotor.
Step.2Assemble the too components, and press out the worn bearing.
Step.3 Lightly lubricate the new bearing, and position it for installation with thetool components assembled. Press the bearing into the spindle assembly until itbottoms.
Step.4 Fasten the bearing retainer in place using the bearing retainer bolts. (OnNeon vehicles,install the snap ring in the knuckle.)
Step.5 Assemble tool components. Lightly oil the hub assembly, and install thehub. Attention: The bearing installer must be assembled with the fiat side towardthe bearing and the small diameter pilot on the side away from the bearing.
Step.6 Assemble the remaining vehicle components that were removed forbearing replacement: (1)lower ball joint to steering knuckle assembly brake rotor.(2)disc brake caliper. (3)outer tie rod nut and tie rod. (4)axle nut, (5)front tires."
浙公網安備33071802888988號
浙ICP備17059961號
Design：www.579xd.com
